c-4405e-STUDIO 9009A

Toshiba e-STUDIO 9009A Error C-4405: Heating Failure

The Toshiba e-STUDIO 9009A error C-4405 is a fuser warm-up time-out fault. It means the heating system failed to reach the required operational temperature within the allotted time during startup. This is frequently linked to power supply instability or a broken heating lamp within the fuser assembly.

1 views

Common causes

  • 1Broken lamp: Heating resistor circuit is open.
  • 2Low power: Insufficient voltage prevents the fuser from heating.
  • 3Thermistor error: False low-temperature reporting.
  • 4Power board fault: No voltage sent to the heating element.

Solutions

Quick Diagnosis

If your e-STUDIO 9009A displays C-4405 upon powering up, the fuser has failed to reach the target heat. If the unit remains cold after significant waiting time, the heating element has likely opened.

Step-by-Step Solution

  1. Switch the power off and unplug the machine for 10 minutes.
  2. Ensure your office power environment is stable and not fluctuating.
  3. Power up the unit to see if the fuser recovers and stabilizes.
  4. If the error is persistent, the fuser lamp is likely dead.

Prevention and Maintenance

Use a professional voltage regulator to protect the machine from power surges that stress the heating lamp. Regular preventive maintenance every 100,000 pages will ensure that fuser components are replaced before they cause downtime.

When to Call a Technician

C-4405 requires a fuser lamp replacement or power board inspection. This is high-voltage equipment and must be handled by certified technicians only.

Technical Specifications

  • Technology: Monochrome Laser Multifunction.
  • Performance: Up to 90 ppm.
  • Connectivity: Ethernet/USB.
  • Input capacity: 8,000 sheets (max).
  • Consumables: Genuine Toshiba high-yield toner.
  • Best for: High-volume corporate environments.
  • Official Support

Steps to follow

  1. 1

    Restart unit

    Power off, wait a few minutes, and turn it back on for a system restart.

  2. 2

    Check power

    Verify the power cord is secure and the electrical outlet provides stable power.

  3. 3

    Check panel logs

    If errors remain, check the service log for specific thermistor alerts.

Frequently asked questions

C-4405 occurs when fuser warm-up time exceeds the limit, indicating a heating lamp or power board fault.

It is not a fire risk, but it renders the copier completely non-functional.

Original high-capacity e-STUDIO series toner is required for optimal operation.

Every 100,000 copies, a technician should inspect the fuser and transfer rollers.