c-3801AccurioPrint C4066

Konica Minolta AccurioPrint C4066 error C-3801

The Konica Minolta AccurioPrint C4066 error C-3801 indicates that the fixing unit (fuser) has failed to reach its target temperature. This is a crucial system error to ensure the proper toner fusion on the printed output.

1 views

Common causes

  • 1Fuser unit failure
  • 2Thermistor damage
  • 3Voltage drops

Solutions

Quick Diagnosis

If the machine flags C-3801 immediately upon startup, verify the supply voltage is adequate.

Step-by-step Solution

  1. Power down for 15 minutes.
  2. Check power cables.
  3. Power up.
  4. Contact support if error recurs.

Prevention and Maintenance

Do not force cycles after an error; allow the system to recover.

When to call a technician

This error requires skilled intervention to measure fuser continuity.

Device technical specs

  • Technology: Laser production
  • Compatible Consumables: TNP-series toner
  • Connectivity: Gigabit Ethernet
  • Official Drivers

Frequently asked questions

It is a low fuser temperature fault; the unit fails to reach the target operating temperature.

No, the error shuts down the machine to protect print quality.

Uses TNP-series toners and associated developer units.

Ensure a dedicated, high-quality electrical circuit for the device.

Konica Minolta AccurioPrint C4066 error C-3801 | Vimazdev