c-3701bizhub 227

Konica Minolta bizhub 227 error C-3701: Fix

The Konica Minolta bizhub 227 error C-3701 identifies an overheating condition in the fuser unit. This code indicates that the thermistor has detected a temperature outside of safe operating limits. The machine locks automatically as a safety measure to prevent roller deformation or paper burning.

1 views

Common causes

  • 1Thermistor failure: Incorrect thermal reading.
  • 2Overuse: Continuous print runs without rest.
  • 3Clogged fuser: Stuck paper trapping heat.
  • 4Blocked ventilation: Dust accumulation in extractors.

Solutions

Diagnóstico rápido

If the error occurs upon startup, it is a sensor fault. If it occurs during intense work, it is a thermal management problem due to workflow intensity.

Solución paso a paso

  1. Cooling: Power off the copier and let the unit rest for at least 30 minutes.
  2. Cleaning: Remove paper residue that might be in contact with the fuser.
  3. Restart: Power on and check if the sensor stabilizes.

Prevención y mantenimiento

Avoid using paper grammage not supported by the device. Keep vents free of dust to improve thermal dissipation.

Cuándo llamar a un técnico

If the C-3701 error persists after cooling, it is highly likely the thermistor is defective and requires immediate replacement.

Ficha técnica del equipo

Konica Minolta bizhub 227 error C-3701: Fix | Vimazdev