c-3103bizhub 250i

Konica Minolta bizhub 250i error C-3103: Technical Fix

The Konica Minolta bizhub 250i error C-3103 occurs when the document feeder motor faces a rotation anomaly. Why does my bizhub 250i show error C-3103? This is usually caused by physical obstructions in the ADF tray or worn sensors. This high-volume copier is essential for office workflows, making this error a priority to resolve.

1 views

Common causes

  • 1Mechanical blockage in the ADF.
  • 2Worn-out feed rollers.
  • 3Motor controller electronic failure.
  • 4Sensor obstruction due to paper dust.

Solutions

Quick Diagnosis

The Konica Minolta bizhub 250i error C-3103 triggers when the system detects the feeder motor is stalling or locked. Check the ADF input path for debris.

Step-by-step Solution

  1. Open the automatic document feeder (ADF) cover.
  2. Remove any paper scraps or debris that may block the rollers.
  3. Wipe rollers with isopropyl alcohol to remove accumulated paper dust.
  4. Power cycle the copier using the main switch and wait 30 seconds before turning it back on.

Prevention and Maintenance

Clean ADF rollers monthly to prevent slippage. Ensure paper is stacked properly. Use genuine TN-328 toner to avoid debris buildup.

When to call a technician

If the message persists after a physical check, the ADF motor or its internal control sensor may require replacement.

Equipment Data

  • Technology: Monochrome Laser
  • Speed: Up to 25 ppm
  • Connectivity: Ethernet, USB
  • Feed Capacity: 3,650 sheets
  • Compatible Consumables: TN-328 Toner
  • Recommended Use: Enterprise office
  • Official Drivers / Support

Steps to follow

  1. 1

    Check ADF

    Inspect for jammed paper in the automatic document feeder.

  2. 2

    Clean Rollers

    Clean the rollers with a soft, damp cloth.

  3. 3

    Power Cycle

    Restart the unit using the main power switch.

Frequently asked questions

This code indicates an error in the document feeder motor rotation.

Yes, it prevents scanning and multi-sheet copying until fixed.

It uses the TN-328 series toner.

Regularly wipe the rubber rollers to keep them clean and provide good grip.

Konica Minolta bizhub 250i error C-3103: Technical Fix | Vimazdev