c-3101bizhub C652iZ

Konica Minolta bizhub C652iZ error C-3101: Fuser fault

The Konica Minolta bizhub C652iZ error C-3101 is a critical thermal fault related to the fuser unit. This occurs when the heat sensor detects an anomaly, preventing the system from reaching operational status safely. If you are asking what is bizhub error C-3101, it is a hardware failure in the thermal subsystem.

1 views

Common causes

  • 1Burned-out fuser lamp.
  • 2Thermistor or sensor malfunction.
  • 3Power wiring issues.
  • 4DC Control Board hardware failure.

Solutions

Quick Diagnosis

The error prevents all jobs. If it persists after cooling and power cycling, hardware components have failed.

Step-by-step Solution

  1. Power off: Disconnect the machine.
  2. Inspect unit: Ensure no jams exist in the rear compartment.
  3. Reboot: Test power cycling.
  4. Stop: Do not attempt to bypass this error.

Prevention and Maintenance

High-volume maintenance is mandatory. Replace components based on service counts.

When to call a technician

Always call a professional. Improper handling can cause fire hazards or severe machine damage.

Equipment Technical Data

  • Technology: Color Laser Copier
  • Speed: 65 ppm
  • Connectivity: LAN, USB
  • Capacity: Up to 6,650 sheets
  • Compatible Consumables: TN-613 toner / Imaging units
  • Usage: Enterprise Production
  • Official drivers / firmware

Steps to follow

  1. 1

    Power off

    Power off the machine completely for 10 minutes.

  2. 2

    Inspect unit

    Check for physical debris within the fuser compartment.

  3. 3

    Reboot

    Power on to check if the error code clears.

Frequently asked questions

It is a fuser temperature fault, usually due to a lamp or thermistor failure.

No, the system is locked to prevent internal damage.

TN-613 toner and specialized drum units.

Yes, certified professional intervention is required.