c-3101AccurioPress C4080

Troubleshooting Error C-3101 on AccurioPress C4080

The Konica Minolta AccurioPress C4080 error C-3101 is a critical notification involving the paper feed system. It occurs when the registration sensor fails to confirm the arrival of paper within the expected time frame. Correcting this usually involves simple maintenance or tray adjustment.

1 views

Common causes

  • 1Dust: Accumulation of paper fibers on pickup rollers.
  • 2Weight: Unsupported paper grammage.
  • 3Alignment: Improperly adjusted tray guides causing misfeeds.

Solutions

Quick Diagnosis

The error C-3101 is typically triggered when the machine's feed cycle fails. Look for potential misalignment in the paper stack or dust contamination on the rubber feed rollers which causes slippage.

Step-by-step Solution

  1. Remove the paper stack from the tray showing the error.
  2. Clean the rubber feed rollers with an isopropyl alcohol-free cloth.
  3. Verify that the side guides match the paper size perfectly.
  4. Reload the paper and test the feed function.

Prevention and Maintenance

Use only high-quality paper within the specified grammage range. Clean the feed rollers every 50,000 impressions to prevent the buildup of paper dust.

When to Call a Technician

If the issue persists after cleaning and testing with fresh media, the registration sensor is likely faulty and requires a technician's inspection.

Technical Specifications

  • Technology: Production Color Laser.
  • Speed: 81 ppm.
  • Connectivity: Gigabit LAN.
  • Capacity: Modular up to 15,390 sheets.
  • Consumable: Genuine TN-622 toner series.
  • Maintenance: Professional feed roller service recommended.
  • Drivers / Firmware Support

Steps to follow

  1. 1

    Check Tray

    Open the affected tray and ensure paper is properly aligned.

  2. 2

    Clean Rollers

    Wipe feed rollers with a clean, dry cloth to remove cellulose dust.

  3. 3

    Paper Quality

    Ensure the paper grammage is within the supported range.

Frequently asked questions

The C-3101 error usually occurs due to a paper feeding detection failure or dirty pickup rollers.

Yes, as this code stops the print engine, preventing you from completing any production jobs.

Always use genuine TN-622 toner for your C4080 to maintain overall system health and print consistency.

Schedule professional cleaning for your paper feed rollers every 50,000 sheets.