c-2802bizhub C452e

Error C-2802 Konica Minolta bizhub C452e: Sensor Fault

The Konica Minolta bizhub C452e error C-2802 relates to the image density sensor (IDC). Clearing toner dust usually resolves the error.

1 views

Common causes

  • 1Dust on sensor lens.
  • 2Sensor end-of-life.
  • 3Cable damage.
  • 4Calibration failure.

Solutions

Quick Diagnosis

Error C-2802 indicates the IDC sensor is blocked or unable to detect reference colors.

Step-by-Step Solution

  1. Access the transfer belt area.
  2. Gently wipe the sensor with a dry cloth.
  3. Calibrate the unit.

Maintenance and Prevention

Regularly clean sensors to maintain calibration accuracy.

When to Call a Technician

If cleaning fails, the sensor likely requires replacement.

Technical Specifications

  • Technology: Color Laser
  • Speed: 45 ppm
  • Connectivity: LAN, USB
  • Consumable: Series C452e toner
  • Usage: High throughput
  • Official Drivers

Steps to follow

  1. 1

    Clean IDC sensor

    Open side door and clean sensor with a soft cloth.

  2. 2

    Check toner

    Ensure genuine toner is installed.

  3. 3

    Calibration

    Run image calibration from the technical menu.

Frequently asked questions

The IDC sensor cannot read toner density.

No, they often interfere with density readings.

It occurs frequently when cleaning is neglected.

Use compressed air for regular sensor dusting.

Error C-2802 Konica Minolta bizhub C452e: Sensor Fault | Vimazdev