C-2560bizhub 758e

Konica Minolta bizhub 758e error C-2560: Fix guide

The Konica Minolta bizhub 758e error C-2560 indicates a failure to synchronize the toner supply reservoir with the development system. Resolving the C-2560 error on the bizhub 758e involves inspecting the sensor and feeding path. High productivity demands consistent toner flow.

1 views

Common causes

  • 1Toner pump sync failure
  • 2Toner duct blockage
  • 3Defective sensor
  • 4Firmware issue

Solutions

Diagnóstico rápido

This error occurs when the toner isn't feeding into the developer despite a full cartridge.

Solución paso a paso

  1. Power down for 5 minutes.
  2. Remove the toner and check the supply port.
  3. Ensure the internal toner agitator is spinning.
  4. Power on and attempt a manual toner load.

Prevención y mantenimiento

Run periodic toner agitation cycles if the printer sits idle to prevent clogging.

Cuándo llamar a un técnico

C-2560 often indicates a toner pump or controller board fault requiring expert help.

Ficha técnica del equipo

  • Technology: B&W Laser
  • Performance: 75 ppm
  • Consumable: TN-714
  • Usage: Production
  • Official drivers