c-2559bizhub 228

Error C-2559 Konica Minolta bizhub 228: Troubleshooting

The Konica Minolta bizhub 228 error C-2559 serves as a critical warning signaling a malfunction in the developer unit motor or its rotation assembly. When the machine senses that the developer motor is not achieving the required RPM, it stops operation to protect the imaging assembly from further damage. Understanding how to fix C-2559 error Konica Minolta involves checking for physical obstructions within the developer unit.

1 views

Common causes

  • 1Compacted toner preventing the developer unit from turning.
  • 2Failure of the rotation sensor monitoring developer movement.
  • 3Wear on the drive motor assembly.
  • 4Debris buildup in the connector gears.

Solutions

Quick Diagnosis

If the machine locks up immediately at startup with the C-2559 message, listen for mechanical resistance. This error usually stems from physical binding within the developer unit assembly.

Step-by-Step Solution

  1. Visual Inspection: Remove the imaging unit and check for compacted toner clogging the gears.
  2. Rotation Test: Manually rotate the drive gear; it should turn smoothly.
  3. Clean Contacts: Wipe down the electrical contacts connecting the unit to the chassis motor.
  4. System Reset: Power off, wait 30 seconds, and restart to clear the sensor logic.

Prevention and Maintenance

Perform regular cleaning of the charger roller and developer assembly as indicated by your service plan (every 50,000 copies). Using original toner is critical to prevent developer aglomeration.

When to Call a Technician

If cleaning the unit does not resolve the lockout, the drive motor or the rotational sensor is likely faulty and requires replacement.

Device Technical Specs

  • Technology: Monochrome Laser Copier.
  • Speed: Up to 22 cpm.
  • Connectivity: USB 2.0 / Ethernet (Optional).
  • Capacity: 1,350 sheets (max).
  • Consumable: TN-118 Toner.
  • Recommended Use: High-volume offices.
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Inspect Imaging Unit

    Open the front cover and remove the PCU to check if the developer roller spins freely without resistance.

  2. 2

    Clean Contacts

    Clean the electrical terminals with isopropyl alcohol to ensure a stable connection.

  3. 3

    Reset Counter

    Enter Service Mode to verify the status and reset the developer counter if necessary.

Frequently asked questions

This code indicates a failure in the developer unit motor rotation. The system cannot detect correct movement within the developer assembly.

Yes, it prevents toner processing, which ruins copy quality and can lead to internal toner spills.

It uses TN-118 series toner and requires scheduled developer unit maintenance.

We recommend cleaning toner concentration sensors and checking the magnetic roller every 50,000 pages.

Error C-2559 Konica Minolta bizhub 228: Troubleshooting | Vimazdev