c-2559AccurioPress C4080

Konica Minolta AccurioPress C4080 error C-2559

Konica Minolta AccurioPress C4080 error C-2559 signifies a breakdown in toner delivery. The toner hopper motor is failing to move the requested amount of toner to the developer unit, triggering an error state to protect print quality and internal hardware.

0 views

Common causes

  • 1Clumped toner debris inside the hopper.
  • 2Hopper motor mechanical burnout.
  • 3Toner bottle gear wear.
  • 4Sensor failure detecting toner concentration.

Solutions

Quick Diagnosis

The C-2559 error is reported when the toner hopper motor fails to reach speed or fails to drive the toner. Inspect the toner hopper and the insertion point for obstructions.

Step-by-Step Solution

  1. Remove the specified toner bottle carefully.
  2. Clean the connector area and check for hardened toner clumps.
  3. Re-seat the bottle to ensure proper gear engagement.
  4. Power cycle the unit to verify if the motor clears the error after the self-check.

Prevention and Maintenance

Use only genuine Simitri toner. Ensure that the storage conditions for toner are dry; humidity can create clumps that strain the toner supply motor.

When to Call a Technician

If the motor makes clicking noises or the error persists, the Toner Hopper Motor assembly or the sensor may be failing, necessitating a technician service call.

Technical Data

  • Technology: Digital production print
  • Speed: 80 ppm
  • Consumable: Simitri HDE Toner
  • Fault Area: Toner Hopper Motor
  • Usage: High-volume commercial print
  • Official Drivers/Firmware

Steps to follow

  1. 1

    Check bottle

    Ensure the toner bottle is correctly seated and installed.

  2. 2

    Clean supply

    Inspect and clean the supply chute for any toner buildup.

  3. 3

    Reset

    Power cycle to trigger automatic toner replenishment.

Frequently asked questions

C-2559 is a toner supply motor fault, meaning toner is not properly transported to the developer unit.

Often, the bottle is fine. Check for physical blockage in the path before replacing.

Yes, if the TCR sensor doesn't detect the toner influx after replenishment, the machine flags error C-2559.

No, the machine stops to avoid printing with low toner density or damaging the developer unit.

Konica Minolta AccurioPress C4080 error C-2559 | Vimazdev