C-2558bizhub C360i

Error C-2558 Konica Minolta bizhub C360i: Guide

The Konica Minolta bizhub C360i error C-2558 indicates an issue with the color developer motor drive. This error prevents the system from properly mixing toner and carrier. Why does my bizhub C360i show error C-2558 on boot? It often results from motor resistance caused by debris or component wear.

0 views

Common causes

  • 1Developer motor gear blockage.
  • 2Toner powder contamination on internal sensors.
  • 3End-of-life developer unit.
  • 4Motor drive electrical failure.

Solutions

Diagnóstico rápido

If the machine emits a grinding noise before showing C-2558, the developer motor is likely blocked. Inspect the toner hopper area for leaks.

Solución paso a paso

  1. Check Toner: Remove and re-insert the toner cartridges.
  2. Manual Inspection: Visually check the imaging unit gears.
  3. Clear Debris: Gently remove any toner powder blocking the sensors or motors.
  4. Reset: Power off, wait, and reboot.

Prevención y mantenimiento

Scheduled maintenance is essential for developer motor health. Only use original TN-328 toner.

Cuándo llamar a un técnico

If the error persists, the motor itself or the imaging unit may require replacement.

Ficha técnica del equipo

  • Technology: Color Laser MFP.
  • Speed: 36 ppm.
  • Compatible Consumables: TN-328.
  • Official Drivers / firmware: https://www.konicaminolta.com/support/bizhub-c360i

Steps to follow

  1. 1

    Check Toner

    Ensure toner is properly seated.

  2. 2

    Manual Inspection

    Check imaging unit for damage.

  3. 3

    Clear Debris

    Clean dust from the motor assembly.

Frequently asked questions

It is a developer motor drive error.

Yes, it locks color printing functions.

TN-328 cartridges.

Routine maintenance and cleaning.