c-2558bizhub 307

Fix Konica Minolta bizhub 307 Error C-2558

Konica Minolta bizhub 307 error C-2558 is a warning regarding the toner concentration sensor (T/C sensor). It alerts the user that the system is unable to balance the required toner levels in the developing unit.

1 views

Common causes

  • 1T/C Sensor saturation: Dust on the optics.
  • 2Supply motor fault: Mechanical failure to dispense toner.
  • 3Developer life expiry: Mixing quality degraded.
  • 4Hopper jam: Clogged toner path.

Solutions

Quick Diagnosis

If the machine displays C-2558, check the toner supply first. If the cartridge is full, the issue is internal to the developer assembly.

Step-by-Step Solution

  1. Confirm the toner cartridge is correctly seated.
  2. Remove the cartridge and check for manual toner flow.
  3. Clean the area around the optical sensors.
  4. Perform a hard restart to re-initialize sensors.

Maintenance and Prevention

Consistent maintenance prevents excessive developer depletion. Always use original consumables to protect your sensor lifespan.

When to Call a Technician

If the error repeats, internal software calibration (T/C ratio adjustment) is needed by a professional.

Technical Data

Steps to follow

  1. 1

    Open side door

    Access the toner hopper area.

  2. 2

    Check cartridge

    Ensure the toner flows correctly.

  3. 3

    Clean sensors

    Dust off optical sensors gently.

Frequently asked questions

This code indicates a failure in toner density detection or a malfunctioning toner supply motor.

You can clean internal debris, but sensor calibration requires a technician.

Use authentic TN-series toners to avoid sensor coating issues.

Maintain a strict preventative schedule as recommended by the manufacturer.