c-2558AccurioPrint C4066

Error C-2558 Konica Minolta AccurioPrint C4066: Fix

The Konica Minolta AccurioPrint C4066 error C-2558 is a specific alert regarding the toner supply motor. When the supply gears encounter higher-than-normal resistance, the system locks up; knowing how to repair C-2558 code in AccurioPrint C4066 is essential for consistent productivity. This high-production printer uses precise mechanisms requiring resistance-free toner movement.

1 views

Common causes

  • 1Cartridge internal mechanism blocked.
  • 2Drive gear wear on the supply motor.
  • 3Toner clumping obstructing the rotation sensor.
  • 4Chip detection error causing motor stall.

Solutions

Quick Diagnosis

The C-2558 error occurs when the toner motor current sensor detects an overload, suggesting the cartridge or development unit might be obstructed.

Step-by-Step Solution

  1. Access Toner: Open the unit's front access door.
  2. Extraction: Remove the suspect toner cartridges.
  3. Verification: Check if the cartridge spins freely manually (without forcing).
  4. Cleaning: Wipe the gear contact areas with a dry cloth.
  5. Restart: Reinsert toner cartridges and close the door to reset the system.

Prevention and Maintenance

Always use genuine consumables. Professional preventative maintenance of toner lines is advised every 50,000 prints.

When to Call a Technician

If the error persists after checking the cartridges, the internal toner supply motor likely requires a professional replacement.

Equipment Specifications

  • Technology: Digital Color Production
  • Speed: 66 ppm
  • Connectivity: Ethernet 10/100/1000
  • Resolution: 1200 x 3600 dpi
  • Compatible Consumables: TN-619 Series
  • Recommended Use: Print shops, graphics production
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Remove Toner

    Open the front door and remove all toner cartridges.

  2. 2

    Inspect Gears

    Check the motor housing for any foreign objects or debris.

  3. 3

    Reinsert Cartridges

    Place cartridges back, ensuring they lock firmly in position.

Frequently asked questions

This error points to an overload or lack of response from the motor that supplies toner to the developing unit.

No, the error stops the toner supply, which will result in poor output quality.

Only use original TN-619 series toner to prevent motor damage.

Yes, removing excess toner powder helps prevent gear blockages.

Error C-2558 Konica Minolta AccurioPrint C4066: Fix | Vimazdev