c-2558AccurioPrint C4065

Konica Minolta AccurioPrint C4065 Error C-2558: Solution

The Konica Minolta AccurioPrint C4065 error C-2558 reports a rotation failure in the development unit motor. This error is triggered when the motor fails to reach expected RPMs or detects abnormal torque levels. To fix error C-2558 on AccurioPrint C4065, we recommend performing a physical inspection of the motor and development unit gears.

1 views

Common causes

  • 1Accumulated debris preventing free rotation of the developer.
  • 2Malfunctioning development motor torque sensor.
  • 3Incorrect installation of the development unit after consumable replacement.
  • 4Mechanical wear of internal gears.

Solutions

Diagnóstico rápido

The C-2558 alerts you to a performance issue in the development motor. If you hear straining noises from the development units, the motor is stopping itself to prevent major damage.

Solución paso a paso

  1. Motor Inspection: Power off the unit and remove the relevant development unit to see if the gears rotate freely.
  2. Toner Check: Verify the toner bottle is correctly installed and not interfering with the mixing mechanism.
  3. System Reset: Power on the machine to check if the rotation detection succeeds.
  4. Technical Test: If the error persists, review maintenance history to see if units were recently replaced.

Prevención y mantenimiento

Only use original Simitri toner. Keep the machine away from high-vibration areas. Visually inspect gears during every consumable change for early wear detection.

Cuándo llamar a un técnico

If there is physical resistance when rotating the gears manually, there is an internal mechanical problem (like a seized bearing) that requires professional support.

Ficha técnica del equipo

  • Technology: Color laser, development control via stepper motor
  • Speed/Performance: 65 ppm
  • Connectivity: Gigabit LAN
  • Paper Capacity: Standard trays and LU
  • Compatible Consumables: Development Unit, Toner TN-626
  • Recommended Usage: Intensive production
  • Drivers / Official Firmware

Steps to follow

  1. 1

    Motor Inspection

    Power off the unit and remove the relevant development unit to see if the gears rotate freely.

  2. 2

    Toner Check

    Verify the toner bottle is correctly installed and not interfering with the mixing mechanism.

  3. 3

    System Reset

    Power on the machine to check if the rotation detection succeeds.

Frequently asked questions

C-2558 is a development motor detection error that triggers when the motor torque is higher than normal, indicating an internal blockage.

Yes, excessive torque can damage gears if the machine continues to operate without clearing the blockage.

Inspect the development unit and ensure original toner supplies are being used.

Keep the area around the development unit clean and always use original consumables to prevent obstructions.

Konica Minolta AccurioPrint C4065 Error C-2558: Solution | Vimazdev