c-2403bizhub PRO 951

Konica Minolta bizhub PRO 951 error C-2403: Fix

The Konica Minolta bizhub PRO 951 error C-2403 is a developer synchronization fault. Why is my bizhub PRO 951 showing C-2403? It indicates that the toner/developer ratio sensor (TCR) is reading inconsistent values.

0 views

Common causes

  • 1Developer density error
  • 2TCR sensor obstruction
  • 3Drive gear failure
  • 4Expired developer

Solutions

Diagnóstico rápido

If the machine stops with C-2403, the developer mix is likely unstable. Check if toner is actually reaching the developer unit.

Solución paso a paso

  1. Inspect the developer supply unit.
  2. Clean the TCR sensor.
  3. Run TCR stabilization through service mode.

Prevención y mantenimiento

Use original TN-910 toner exclusively to maintain chemical consistency.

Cuándo llamar a un técnico

If stabilization fails, the developer unit drive gears may need replacement.

Ficha técnica del equipo

  • Technology: Laser Monochrome
  • Performance: 95 ppm
  • Connectivity: Gigabit Ethernet
  • Feed: 9,000 sheets
  • Consumable: TN-910
  • Use case: High production
  • Drivers / official firmware

Steps to follow

  1. 1

    Check gears

    Ensure assembly turns.

  2. 2

    Sensor check

    Clean the TCR sensor.

  3. 3

    Stabilize

    Run service menu tools.

Frequently asked questions

Inconsistent toner/developer ratio detected.

Perform a TCR stabilization in service mode.

Usually sensor or mechanical gear issue.

Follow developer replacement schedule.

Konica Minolta bizhub PRO 951 error C-2403: Fix | Vimazdev