c-2201bizhub 361

Konica Minolta bizhub 361 error C-2201 Fix

The Konica Minolta bizhub 361 error C-2201 is a diagnostic code for the registration motor subsystem. This error signals that the motor is failing to time the paper feed correctly to match the image transfer process. When considering why is my bizhub 361 showing error C-2201, look first for physical obstructions, as this remains the most common failure point for mid-range copiers.

1 views

Common causes

  • 1Debris or paper stuck in the registration roller.
  • 2Aging roller grip surface loses friction.
  • 3Registration motor electrical component burnout.
  • 4Timing sensor dirty or malfunctioning.

Solutions

Quick Diagnosis

If you hear a distinct clicking or straining sound when sending a job, the registration rollers are struggling to move. The code is triggered by the controller detecting excessive torque or speed mismatch.

Step-by-Step Solution

  1. Power off the copier completely.
  2. Open the main side doors to locate the registration roller.
  3. Carefully extract any paper scraps or dust bundles lodged in the rollers.
  4. Clean the surface of the rollers using a dedicated rubber cleaner or isopropyl alcohol.
  5. Restart the device to attempt a new registration cycle.

Prevention and Maintenance

Regular cleaning of the paper path prevents the buildup that leads to C-2201. Maintain consistent indoor temperature to keep the feed rollers pliable.

When to Call a Technician

If the motor exhibits persistent struggle or if the code appears despite a clean paper path, seek professional diagnosis, as the motor may be nearing its end-of-life.

Technical Specifications

  • Technology: Digital Laser Copier
  • Print Speed: 36 cpm
  • Connectivity: Ethernet, USB
  • Capacity: 1,150 sheets standard
  • Consumable: TN-211 Toner
  • Usage: Office workgroups
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check Path

    Examine the registration roller area for jammed paper debris.

  2. 2

    Clean Rollers

    Wipe the feed and registration rollers with isopropyl alcohol.

  3. 3

    Power Reboot

    Turn off the device, wait a moment, and power it back on.

Frequently asked questions

The C-2201 indicates that the registration motor did not reach the correct speed or position, often due to physical resistance.

Simple debris removal can often fix this, but internal motor faults require professional service.

Original TN-211 toner is highly recommended for longevity of the imaging unit.

Call an expert if the error reappears immediately after clearing the paper path.

Konica Minolta bizhub 361 error C-2201 Fix | Vimazdev