c-0202AccurioPress C4080

Konica Minolta AccurioPress C4080 error C-0202

Konica Minolta AccurioPress C4080 error C-0202 occurs when the tray lift mechanism fails to achieve the correct height. This prevents paper from entering the transport system. Common fixes include clearing tray obstructions or cleaning the feed rollers.

0 views

Common causes

  • 1Tray lift limit sensor error.
  • 2Mechanical bind in the tray slide rail.
  • 3Worn out rubber pickup rollers.
  • 4Excessive paper stack height exceeding tray capacity.

Solutions

Quick Diagnosis

The error C-0202 is an tray-lift operation fault. You will see this code when the printer detects that the lift motor has stalled. Listen for straining motor sounds to identify if the issue is a mechanical obstruction.

Step-by-Step Solution

  1. Withdraw the indicated tray entirely.
  2. Inspect the contents for jammed paper sheets.
  3. Sanitize the pickup rollers using a standard office equipment roller-cleaner.
  4. Check the tray guides for any foreign debris or small paper scraps.
  5. Perform a hard power cycle via the main circuit breaker.

Prevention and Maintenance

Regular maintenance includes cleaning the feed rubber rollers. Store your paper in humidity-controlled environments to prevent sheets from sticking together, which places extra load on the lift motor.

When to Call a Technician

If the tray does not move at all or if the error returns immediately after service, the tray lift motor or main sensor board may require professional replacement.

Technical Data

  • Technology: Electrophotographic production
  • Speed: Up to 80 ppm
  • Network: Gigabyte Ethernet
  • Total Capacity: Up to 15,390 sheets
  • Toner Family: Simitri HDE
  • Application: Commercial print production
  • Official Drivers/Firmware

Steps to follow

  1. 1

    Check tray

    Pull out the tray and ensure paper is correctly aligned and stacked.

  2. 2

    Clean rollers

    Wipe the feed rollers using a lint-free cloth moistened with water.

  3. 3

    Power cycle

    Shut down the printer via main power, wait 2 minutes, then reboot.

Frequently asked questions

The C-0202 code denotes a failure in the tray lift motor or sensor, preventing the paper from reaching the feed position.

Yes, C-0202 prevents paper feed in the affected tray. Continuing without resolving it may damage the lift mechanism.

Ensure paper is correctly sized for the tray, clean the rollers periodically, and avoid overloading beyond maximum limits.

Yes, damp or non-standard stock can cause enough drag to fail the tray lift sensors, triggering C-0202.