c-01WorkForce ST-3000

Epson WorkForce ST-3000 error C-01: Ink system failure

The Epson WorkForce ST-3000 error C-01 relates to the ink delivery system. This code flags sensor issues or air bubbles in the ink lines. Fixing the C-01 error is essential for long-term print head health.

1 views

Common causes

  • 1Low ink levels.
  • 2Non-original ink damage.
  • 3Long periods of inactivity.
  • 4Failed pump assembly.

Solutions

Quick Diagnosis

If ink levels are adequate but the print quality is poor, C-01 confirms air blockage in the ink supply tubes.

Step-by-Step Solution

  1. Check Levels: Ensure tanks are filled.
  2. Head Cleaning: Run the built-in head cleaning utility.
  3. Power Cycle: Reset the printer.
  4. Verify: Perform a nozzle check.

Prevention and Maintenance

Use original T502 ink only. Do not let the printer sit idle for more than two weeks.

When to Call a Technician

If after multiple cleaning cycles the error remains, the pump unit or print head may require replacement.

Equipment Technical Data

  • Technology: EcoTank
  • Compatible Ink: T502
  • Drivers

Steps to follow

  1. 1

    Check levels

    Verify visible ink levels.

  2. 2

    Purge air

    Run head cleaning utility.

  3. 3

    Restart

    Power cycle to reset readings.

Frequently asked questions

The C-01 indicates air in the ink tubes or a low ink fault.

Yes, low ink levels can damage the print head.

Original T502 ink is required for optimal performance.

Run test pages periodically to keep ink flowing.