c-0070bizhub 202

Konica Minolta bizhub 202 Error C-0070: Fix

The Konica Minolta bizhub 202 error C-0070 relates to the paper feed and transport mechanism. Why is my Konica Minolta bizhub 202 showing error C-0070? It usually means the feed motor is not rotating correctly or is blocked by an obstacle in the paper path. Inspecting the trays and sensors is the most effective way to resolve this issue.

1 views

Common causes

  • 1Stalled paper feed motor.
  • 2Faulty paper detection sensor in the tray.
  • 3Worn-out feed roller causing slipping.
  • 4Physical obstruction in the internal path (staples, paper scraps).

Solutions

Diagnóstico rápido

The device locks up with 'C-0070' on display. This points to a transport motor fault, often caused by a stalled roller or unseen paper debris blocking the path.

Solución paso a paso

  1. Inspect trays: Remove paper trays and look for small bits of paper or foreign objects in the path.
  2. Power reset: Unplug the unit and wait for 2 minutes to drain the motor memory before restarting.
  3. Clean sensors: Use compressed air to clean paper input sensors and remove dust buildup.
  4. Tray test: Try printing from the manual tray to determine if the issue is limited to the main tray.

Prevención y mantenimiento

Clean the pickup rollers monthly. Use high-quality paper, as low-cost paper dust can contaminate the sensors and impede motor performance.

Cuándo llamar a un técnico

If the error persists after thorough cleaning, the feed motor or its gear assembly may be damaged and requires a professional replacement.

Ficha técnica del equipo

  • Technology: Digital laser copier
  • Speed: 20 ppm
  • Connectivity: USB, network (optional)
  • Consumable compatible: Konica Minolta TN-116 toner
  • Recommended use: Small to medium-sized office
  • Official drivers / firmware

Steps to follow

  1. 1

    Inspect trays

    Remove paper trays and look for small bits of paper or foreign objects in the path.

  2. 2

    Power reset

    Unplug the unit and wait for 2 minutes to drain the motor memory.

  3. 3

    Clean sensors

    Use compressed air to clean input sensors of paper dust.

Frequently asked questions

This error signals a failure in the paper feed motor or a mechanical obstruction in the transport path.

Minor jams can be cleared by cleaning, but mechanical motor failures usually require a service call.

It uses the TN-116 series toner. Using genuine toner is best for the developer unit health.

Keep paper stored in a dry place and ensure feed rollers are clean and original.