c-0001SureLab D1070

Epson SureLab D1070 Error C-0001: Fix guide

The Epson SureLab D1070 error C-0001 is a common warning code triggered by a disruption in the paper feed system. This fault typically occurs when debris, dust, or an improperly loaded media roll prevents the printer from moving paper correctly through the print engine. To resolve the C-0001 error, follow these troubleshooting steps to ensure your device returns to full productivity.

1 views

Common causes

  • 1Debris buildup in the feed rollers.
  • 2Improper media roll loading.
  • 3Obstruction of the optical paper sensor.
  • 4Temporary motor stall due to media resistance.

Solutions

Diagnóstico rápido

Error C-0001 occurs when the control panel signals an interruption in the media path. If you notice grinding sounds or the printer is stuck during the boot cycle, the paper transport sensors are likely blocked.

Solución paso a paso

  1. Power off the printer and disconnect from the power source.
  2. Open the upper maintenance cover to inspect the feed path.
  3. Remove any paper scraps or dust accumulation with non-metallic tweezers.
  4. Close the cover and power the device back on to initiate a self-test.

Prevención y mantenimiento

Avoid touching the surface of the paper rolls to prevent oils from affecting the rollers. Use compressed air to clear internal dust once a month. Use genuine paper rolls to minimize media-related errors.

Cuándo llamar a un técnico

If the issue persists despite cleaning the paper path, an optical sensor may have failed internally, requiring professional service.

Ficha técnica del equipo

  • Technology: Photo inkjet printer.
  • Output speed: Up to 460 4x6 prints per hour.
  • Connectivity: USB 3.0, Wi-Fi, Ethernet.
  • Media capacity: High-capacity roll support.
  • Compatible supplies: UltraChrome D6r-S inks.
  • Usage: Professional photo production.
  • Official firmware/drivers

Steps to follow

  1. 1

    Power down

    Turn off the printer and unplug for one minute.

  2. 2

    Check path

    Open top cover and inspect for paper scraps.

  3. 3

    Restart

    Power on and wait for calibration.

Frequently asked questions

This code usually flags a obstruction in the paper path.

It is a standard operational error that is typically user-fixable.

Genuine Epson photo rolls are highly recommended for best results.

Gently clean with a lint-free cloth every few thousand prints.