b200PIXMA TS9120

Canon PIXMA TS9120 Error B200: Technical Fix

The Canon PIXMA TS9120 error B200 is a severe hardware alert signaling a printhead circuit or power failure. The printer locks up to protect internal components. While cleaning contacts can sometimes rule out poor connections, this often points toward a major hardware fault.

1 views

Common causes

  • 1Printhead overheating or short circuit.
  • 2Low-quality third-party ink.
  • 3Mainboard communication fault.
  • 4Natural hardware degradation.

Solutions

Diagnóstico rápido

Error B200 appears on startup. It is usually terminal for the printhead module.

Solución paso a paso

  1. Unplug power for 15 minutes.
  2. Open the printer and remove all ink cartridges.
  3. Clean the metallic contact surfaces with a lint-free cloth.
  4. Reinstall the cartridges and test power-on.

Prevención y mantenimiento

Use OEM Canon PGI-280 / CLI-281 inks to prevent electrical spikes in the printhead. Run regular printer head cleaning cycles to prevent clogging.

Cuándo llamar a un técnico

If the error is persistent, the printhead or logic board is likely damaged beyond repair, requiring professional replacement.

Ficha técnica del equipo

  • Technology: Inkjet
  • Resolution: 4800 x 1200 dpi
  • Connectivity: Wi-Fi, BT, USB
  • Capacity: 100 sheets
  • Consumables: PGI-280 / CLI-281 series
  • Use Case: Photo and home office
  • Official drivers / firmware

Steps to follow

  1. 1

    Power off

    Unplug the printer for 10 minutes.

  2. 2

    Clean contacts

    Remove cartridges and wipe the metallic contacts with a dry cloth.

  3. 3

    Reinstall

    Insert cartridges and power on to test.

Frequently asked questions

This indicates a power surge or a circuit failure in the printhead.

It is a severe hardware failure; cleaning contacts rarely fixes it permanently.

CLI-281 / PGI-280 series. Low-quality ink can damage the electronics.

Usually, replacement of the printhead is expensive; consider your printer's age before repairing.