b200PIXMA TS8420a

Canon PIXMA TS8420a B200 error: Troubleshooting

The Canon PIXMA TS8420a B200 error is a service warning triggered by a detected voltage irregularity in the print head or logic board. Understanding what to do when Canon PIXMA shows B200 error requires a careful, power-off approach to prevent further hardware damage. This guide provides actionable steps to attempt a self-repair.

1 views

Common causes

  • 1Print head short circuit due to dry ink residue
  • 2Main board voltage surge
  • 3Use of poor-quality compatible cartridges
  • 4Thermal component fatigue within the print head

Solutions

Diagnóstico rápido

The error usually appears upon power-up. If the printer freezes with this code, it signals an electrical anomaly that the machine cannot self-correct.

Solución paso a paso

  1. Disconnect power cord for 15 minutes.
  2. Remove all ink cartridges carefully.
  3. Examine the gold contacts for ink leaks or residue.
  4. Attempt to boot the printer with cartridges removed.

Prevención y mantenimiento

Use genuine Canon inks only to ensure correct electrical conductivity. Keep the printer in a cool, dry place to prevent moisture-induced corrosion on sensitive logic circuits.

Cuándo llamar a un técnico

If the error persists after a hard power cycle and inspection, it indicates a permanent failure of the print head or the main circuit board requiring specialized professional service.

Ficha técnica del equipo

  • Technology: Thermal inkjet
  • Performance: High-quality photo printing
  • Connectivity: Wi-Fi, USB, Bluetooth
  • Feeding: Dual tray system
  • Compatible media: CLI-281 / PGI-280 (Original recommended)
  • Recommended use: Home / Photo studio
  • Drivers / firmware official

Steps to follow

  1. 1

    Power down

    Unplug the power cord for at least 15 minutes.

  2. 2

    Cartridge check

    Remove all ink cartridges and inspect the contacts.

  3. 3

    Clean contacts

    Gently clean the print head contacts with a soft dry cloth.

Frequently asked questions

Immediately disconnect the printer from power to prevent electrical damage, as B200 usually indicates a voltage fault.

Often, it indicates a short circuit in the print head, though it can also stem from main board issues.

Always use genuine CLI-281/PGI-280 inks to maintain proper electrical resistance in the print head.

Regular maintenance prevents nozzle overheating and ink buildup, which are common catalysts for B200 errors.