991C110

OKI C110 error 991: Troubleshooting Guide

The OKI C110 error 991 occurs when the print engine fails to respond to incoming data requests. If you are experiencing this issue, verify your cable connections first, as this is a common communication conflict. Keeping your firmware up to date is essential for maintaining seamless connectivity.

1 views

Common causes

  • 1Damaged or low-quality data cable.
  • 2Driver/software corruption on the workstation.
  • 3Power supply instability affecting the logic board.
  • 4Outdated device firmware.

Solutions

Quick Diagnosis

Error 991 is a common alert for communication timeout. Why is my OKI C110 showing error 991? It often results from a faulty cable or an interrupted software handshake.

Step-by-Step Solution

  1. Power off the printer entirely.
  2. Unplug the data and power cables.
  3. Wait 60 seconds to clear internal cache.
  4. Reconnect and perform a test print.

Prevention and Maintenance

Always use high-quality cables. Ensure your office environment is dry to prevent port corrosion. Use original toner cartridges to maintain print quality standards.

When to Call a Technician

If the error persists after swapping cables and testing on a different PC, the internal logic board may need servicing.

Ficha técnica del equipo

  • Technology: LED Digital
  • Performance: 20 ppm
  • Connectivity: USB 2.0
  • Input capacity: 200 sheets
  • Consumable: OKI C110 series toner cartridges
  • Recommended use: Small office
  • Official drivers / firmware

Steps to follow

  1. 1

    Power Cycle

    Power off the printer and unplug the power cord for at least one minute.

  2. 2

    Cable Check

    Inspect the USB or Ethernet cable for damage and ensure a tight fit.

  3. 3

    Driver Reset

    Restart your computer's print spooler service to clear stuck jobs.

Frequently asked questions

It usually indicates a temporary loss of communication between your computer and the printer.

It is rarely a hardware failure and usually clears after a reset.

It uses the standard OKI C110 series toner cartridges.

Check cables annually to prevent oxidation and contact issues.

OKI C110 error 991: Troubleshooting Guide | Vimazdev