900.00M1246

Lexmark M1246 error 900.00: Troubleshooting guide

The lexmark m1246 error 900.00 signifies a system exception that interrupts standard printing operations. This error code often appears when the system controller encounters a conflict while executing print jobs. Understanding why does my Lexmark M1246 show error 900.00 is crucial for implementing the correct fix. This model is engineered for high-performance output, and software glitches are the most common cause of this interruption.

1 views

Common causes

  • 1Firmware mismatch: Incompatibility during language instruction processing.
  • 2Corrupt print jobs: Documents with errors halting the system.
  • 3Memory overload: Buffer depletion during complex document processing.
  • 4Power instability: Voltage drops affecting system boot sequences.

Solutions

Diagnóstico rápido

The 900.00 error is a distinct firmware system fault. If the control panel remains unresponsive or stuck on the error message, identify if it happens during network communication or local printing.

Solución paso a paso

  1. Unplug the printer from all power and data cables.
  2. Clear the print queue on all connected workstations to remove potentially corrupt files.
  3. Power on directly by connecting the device to a dedicated wall power socket.
  4. Update firmware by downloading the latest system code from the official support website.

Prevención y mantenimiento

Ensure regular cleaning of the paper path to prevent mechanical sensors from triggering false software warnings. Maintain current firmware levels to ensure optimal system compatibility.

Cuándo llamar a un técnico

If the error persists during the boot process even after a full reset and firmware update, the internal controller board may require professional hardware service.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Speed: Up to 46 ppm
  • Connectivity: Gigabit Ethernet, USB 2.0
  • Compatible Consumables: M1246 Series High-yield cartridges
  • Recommended usage: High-volume corporate environments
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Power Cycle

    Unplug the power cable for 60 seconds to clear residual memory.

  2. 2

    Clear Network Connections

    Disconnect USB and network cables to isolate the issue.

  3. 3

    Restart

    Plug the device directly into a wall outlet and power on.

  4. 4

    Update Firmware

    If the device boots, perform a firmware update via the official support site.

Frequently asked questions

Error 900.00 is a general firmware exception, typically triggered when the printer struggles to interpret a specific print job or command.

It is usually a software-based conflict. If it recurs frequently, ensure your print drivers are updated and no corrupt files are in the queue.

No, error 900.00 is unrelated to toner or consumables. It pertains to the printer's internal system controller.

Keep the firmware updated and avoid sending extremely complex graphics files that might overwhelm the processor.