900.00B2338dw

Lexmark B2338dw error 900.00: System Failure

The Lexmark B2338dw error 900.00 is a critical system code typically pointing to a firmware fault or an issue with processing a specific print job. This error causes the printer to lock up, preventing any further operations until resolved. Knowing how to fix error 900.00 on B2338dw usually involves performing a power cycle or checking for a firmware update on the Lexmark support site.

0 views

Common causes

  • 1Temporary corruption in the process memory (RAM).
  • 2Conflict with large, complex print files.
  • 3Outdated firmware that contains known bugs.
  • 4Print queue overload causing memory overflow errors.

Solutions

Diagnóstico rápido

The 900.00 error frequently appears when attempting to print complex PDFs or large files with special characters. It is an internal controller processing error rather than a physical mechanical fault.

Solución paso a paso

  1. Hard Reset: Power off the device, unplug it for at least 60 seconds, and restart.
  2. Clear queues: Cancel all pending print jobs from your computer's print queue.
  3. Firmware: Access the web management console to check for any available firmware updates.
  4. Internal test: Send an internal test page from the printer menu to verify if the hardware is stable.

Prevención y mantenimiento

Keep the printer firmware updated to the latest version. Avoid sending overly complex print jobs that might exceed the printer's internal memory capacity.

Cuándo llamar a un técnico

If the error appears immediately upon startup even without incoming print jobs, it suggests a failure of the mainboard or internal memory modules, requiring professional service.

Ficha técnica del equipo

  • Technology: Monochrome laser printer
  • Processor: Dual Core 1 GHz
  • Internal memory: 256 MB
  • Connectivity: USB, Ethernet, Wi-Fi
  • Consumibles: Lexmark 23B series
  • Recommended use: Corporate environments
  • Official drivers / firmware