900-00C2240

Lexmark C2240 Error 900.00: System Failure

The Lexmark C2240 error 900.00 is an internal system error suggesting an unexpected failure within the firmware or during the processing of tasks. This code serves as a high-level indicator that the motherboard failed to complete a critical process. Resolving the 900.00 error on your C2240 involves performing a clean reset of the environment. This is a high-performance color laser printer engineered for demanding corporate workloads.

1 views

Common causes

  • 1Firmware corruption
  • 2Corrupt print job format
  • 3Network interface conflict
  • 4Physical motherboard RAM defect

Solutions

Diagnóstico rápido

The 900.00 code is the equivalent of a system crash. If it happens during a job, it's often a corrupt print job file. If it happens at startup, it's a core firmware issue.

Solución paso a paso

  1. Power off completely and unplug all network/USB data cables.
  2. Wait for a few minutes, then restart with only the power cable connected.
  3. Clear the print queue from all networked computers.
  4. Update firmware by downloading the latest release from the official Lexmark site.

Prevención y mantenimiento

Keep the printer firmware current. Protect the unit with a high-quality surge protector to prevent power spikes from corrupting the internal system memory.

Cuándo llamar a un técnico

If the error 900.00 persists even after a clean reboot with no data cables attached, the mainboard likely requires a hardware replacement.

Ficha técnica del equipo

  • Technology: Color Laser
  • Print Speed: 40 ppm
  • Connectivity: USB, Gigabit, Ethernet
  • Compatible Supply: Lexmark 502/602 series
  • Drivers / Official Firmware: https://www.lexmark.com/en_us/support/c2240.html

Steps to follow

  1. 1

    Reboot

    Power off and disconnect the unit for 2 minutes.

  2. 2

    Clear Network

    Remove data cables to isolate the issue.

  3. 3

    Update

    Apply the latest firmware if the system allows.

Frequently asked questions

It is a generic system error often linked to firmware corruption or print job conflicts.

Often yes, by updating firmware or clearing the print queue.

Lexmark 502/602 series.

If the error appears on startup with all data cables detached.