880.00MB2650adwe

Lexmark MB2650adwe error 880.00: Toner fault

The Lexmark MB2650adwe error 880.00 signifies that the printer cannot detect the installed toner cartridge. Learning how to fix Lexmark 880.00 toner error starts by ensuring proper contact of the toner chip. If this error appears, do not panic; it is usually a simple connectivity issue.

1 views

Common causes

  • 1Dirty toner chip.
  • 2Improper cartridge installation.
  • 3Firmware/Chip incompatibility.

Solutions

Diagnóstico rápido

If the error persists after installation, the chip isn't communicating with the printer logic.

Solución paso a paso

  1. Remove toner.
  2. Clean chip contacts.
  3. Reinsert toner.
  4. Restart printer.

Prevención y mantenimiento

Use official Lexmark Unison cartridges and keep contacts clean.

Cuándo llamar a un técnico

If replacing the cartridge doesn't solve it, the printer's toner sensor board might be at fault.

Ficha técnica del equipo

  • Technology: Monochrome laser
  • Consumables: Unison Toner
  • Use: Business/Office
  • Support

Steps to follow

  1. 1

    Remove cartridge

    Carefully remove the toner cartridge from the printer.

  2. 2

    Inspect chip

    Check the chip on the cartridge for debris or damage.

  3. 3

    Reinstall

    Reinsert the cartridge firmly until it clicks.

Frequently asked questions

It is a communication error between the chip and the printer.

Cleaning the contacts often resolves communication issues.

Lexmark Unison toner ensures seamless electronic communication.

Avoid touching the electronic chip contacts.