880.00cx622ade

Lexmark cx622ade 880.00 error: Scanner Failure

The lexmark cx622ade 880.00 error notifies the user of a malfunction within the scanning unit subsystem. This typically occurs when the optical carriage fails to calibrate or gets physically stuck during motion. Knowing the cause of the lexmark cx622ade 880.00 error helps decide if a simple restart will fix it or if technical service is needed.

0 views

Common causes

  • 1Motor failure: Wear on the optical carriage drive.
  • 2Obstruction: Foreign object blocking the path.
  • 3Firmware error: Logic board communication conflict.
  • 4Sensor failure: Initial position sensing error.

Solutions

Diagnóstico rápido

If the scanner makes a grinding sound or 'chatters' before hitting the 880.00 error, the carriage belt is likely slipping or the motor is failing to move the carriage freely.

Solución paso a paso

  1. Power cycle: Turn off the printer and back on to see if the scanner carriage successfully completes its calibration.
  2. Clear obstructions: Ensure nothing is blocking the scanner lid or the Automatic Document Feeder (ADF).
  3. Firmware check: Check for official firmware updates that improve scanner movement and calibration logic.
  4. Scanner test: Attempt a basic scan from the front control panel to check the status.

Prevención y mantenimiento

Keep the scan glass clear of any stickers or adhesive residue. Regularly clean the ADF rollers to keep the feed mechanism smooth and reduce load on the scanner motors.

Cuándo llamar a un técnico

If the error persists after a factory reset or if you hear metallic noises from the scanner, the scanner assembly must be replaced.

Ficha técnica del equipo

  • Technology: Color Laser MFP
  • Speed: 40 ppm
  • Connectivity: USB, Ethernet
  • Input: 650 sheets
  • Consumible compatible: Lexmark 62D series
  • Recommended usage: Office
  • Drivers / firmware official

Steps to follow

  1. 1

    Power cycle

    Turn off the printer and back on to see if the scanner carriage successfully completes its calibration.

  2. 2

    Clear obstructions

    Ensure nothing is blocking the scanner lid or the Automatic Document Feeder (ADF).

  3. 3

    Firmware check

    Check for official firmware updates that improve scanner movement and calibration logic.

  4. 4

    Scanner test

    Attempt a basic scan from the front control panel to check the status.

Frequently asked questions

The 880.00 error code indicates a failure in the scanner's motor or positioning sensor, causing the scanning carriage to lock up.

If it's a mechanical failure, you will likely need to replace the entire scanner unit.

While the scanner doesn't use toner, cleaning the ADF rollers periodically is essential for reliable operation.

Avoid placing heavy items on the scanner lid and clean the glass regularly with non-abrasive cleaners.

Lexmark cx622ade 880.00 error: Scanner Failure | Vimazdev