80.01MB3153dw

Error 80.01 Lexmark MB3153dw: Scanner fault

The Lexmark MB3153dw error 80.01 represents a scanner communication failure. This prevents the MFP from performing any scan-related tasks. Below is a guide to help you differentiate between software bugs and physical malfunctions.

1 views

Common causes

  • 1Mechanically stuck scanner carriage.
  • 2Outdated firmware.
  • 3Voltage spike damaging logic board.
  • 4End-of-life scanner lamp.

Solutions

Diagnóstico rápido

If the scanner makes a grinding sound, there is likely a mechanical obstruction. If silent, a firmware refresh is the recommended first step.

Solución paso a paso

  1. Power cycle: Unplug the device.
  2. Inspect: Check for physical blockage.
  3. Clean: Clean glass surface.
  4. Update: Install latest official firmware.

Prevención y mantenimiento

Avoid slamming the scanner lid. Clean the internal carriage guide if accessible.

Cuándo llamar a un técnico

If reset attempts fail, the scanner motor or the lamp may be damaged.

Ficha técnica del equipo

  • Technology: Monochrome laser
  • Print speed: 50 ppm
  • Connectivity: USB, Ethernet, Wi-Fi
  • Input capacity: 650 sheets
  • Compatible consumables: Lexmark 50 series
  • Usage: Professional office
  • Drivers / firmware official

Steps to follow

  1. 1

    Power cycle

    Power off and unplug for 30 seconds.

  2. 2

    Check carriage

    Ensure nothing blocks the scanner carriage.

  3. 3

    Update firmware

    Install latest firmware from Lexmark support.

Frequently asked questions

The scanner failed to initialize properly during startup.

Simple resets usually work, but persistent errors may indicate hardware damage.

Lexmark 50 series. Always use genuine products.

Keep glass clean and handle with care.