80.01CX310dn

Lexmark CX310dn error 80.01: Firmware Failure

The Lexmark CX310dn error 80.01 is a system code indicating firmware corruption. If you are wondering what is Lexmark error 80.01, it is a system-level failure where the controller board fails to interpret commands.

1 views

Common causes

  • 1Interrupted firmware update.
  • 2Power surge during memory write.
  • 3Incompatible firmware file.
  • 4Flash memory flash failure.

Solutions

Diagnóstico rápido

Often shows as a boot loop or a permanent error message on the screen. It is a software issue.

Solución paso a paso

  1. Download the latest firmware from the official support site.
  2. Enter Configuration Menu (Hold OK and Right Arrow during boot).
  3. Update via USB with the downloaded file.
  4. Reboot the device.

Prevención y mantenimiento

Never power down during firmware updates. Use a UPS to avoid power drops.

Cuándo llamar a un técnico

If firmware reinstallation fails, the motherboard may be physically damaged.

Ficha técnica del equipo

  • Tech: Laser.
  • Speed: 23 ppm.
  • Connectivity: USB/Ethernet.
  • Consumibles: 702 series.
  • Usage: Office.
  • Official drivers