80.00MS610dn

Lexmark MS610dn Error 80.00: Fuser Jam

The Lexmark MS610dn error 80.00 signifies that a paper jam has occurred within the high-temperature fuser area. This requires immediate clearing but must be done with caution after the machine has cooled down. Knowing how to fix error 80.00 Lexmark MS610dn is crucial for preventing damage to the fuser's delicate heating rollers.

1 views

Common causes

  • 1Use of unsupported media types.
  • 2Fuser roller contamination.
  • 3Paper skewing during high-speed transport.
  • 4Debris left inside the fuser path.

Solutions

Diagnóstico rápido

Error 80.00 is a standard code for an output sensor fault caused by paper stuck in the fuser. It happens when the paper path is obstructed after the print process begins.

Solución paso a paso

  1. Power off the printer.
  2. Let the unit cool for 20 minutes.
  3. Open the rear output door.
  4. Gently remove the jammed paper.
  5. Close the door and power on.

Prevención y mantenimiento

Avoid printing on media with labels or adhesive tape. Regular cleaning ensures the fuser can handle various media without sticking.

Cuándo llamar a un técnico

If the paper is difficult to remove or if the fuser rollers show wear, the entire fuser module should be replaced by a qualified technician.

Ficha técnica del equipo

  • Tecnología: Monochrome Laser Printer
  • Velocidad/rendimiento aproximado: 50 ppm
  • Conectividad: USB, Ethernet
  • Capacidad de alimentación: 650-2300 sheets
  • Consumible compatible: Lexmark 502/602 series
  • Uso recomendado: Corporate
  • Drivers / official firmware

Steps to follow

  1. 1

    Open rear door

    Access the rear panel to check the output fuser area.

  2. 2

    Remove paper

    Pull out the jammed sheet slowly.

  3. 3

    Restart

    Close all panels to clear the alert.

Frequently asked questions

It is a fuser unit paper jam notification.

No, let it cool for 20 minutes to avoid burns.

Adhesive labels or incorrect paper thickness.

Professional technicians should perform internal cleaning.

Lexmark MS610dn Error 80.00: Fuser Jam | Vimazdev