80.00MB2242adwe

Lexmark MB2242adwe error 80.00: Toner Failure

The Lexmark MB2242adwe error 80.00 is related to the toner or imaging unit detection. It occurs when the electronics cannot correctly read the chip info on the consumable. Reseating the toner or cleaning the metallic contacts usually solves the issue.

1 views

Common causes

  • 1Oxidized or dirty contacts on the cartridge chip.
  • 2Cartridge not properly aligned in the housing.
  • 3Defective or incompatible toner chip.
  • 4Damage to the reader port inside the printer.

Solutions

Diagnóstico rápido

If the printer shows error 80.00 immediately after installing a new supply, it confirms that the cartridge isn't making electrical contact or the chip is damaged.

Solución paso a paso

  1. Remove cartridge: Open the front cover and carefully remove the toner cartridge assembly.
  2. Inspect contacts: Check the metallic contacts on the cartridge chip for any dust or toner residue.
  3. Reinstall: Clean the contacts with a dry cloth and reinsert the cartridge until it clicks into place.

Prevención y mantenimiento

Avoid touching the chip contacts with bare hands. Perform general cleaning of the internal printer bay during every supply change to prevent metallic particle buildup.

Cuándo llamar a un técnico

If replacing the toner with a new original unit doesn't resolve the 80.00 error, a contact sensor inside the unit might be damaged.

Ficha técnica del equipo

  • Technology: Monochrome multifunction laser
  • Speed/rated throughput: 42 ppm
  • Connectivity: USB 2.0, Gigabit Ethernet, Wi-Fi
  • Feeding capacity: 350 sheets standard
  • Compatible supplies: B222/B224 toner cartridge series
  • Recommended use: Corporate environment
  • Official drivers / firmware

Steps to follow

  1. 1

    Remove cartridge

    Open the front cover and carefully remove the toner cartridge assembly.

  2. 2

    Inspect contacts

    Check the metallic contacts on the cartridge chip for any dust or toner residue.

  3. 3

    Reinstall

    Clean the contacts with a dry cloth and reinsert the cartridge until it clicks into place.

Frequently asked questions

This code indicates a communication failure between the toner cartridge chip and the printer's main board.

Yes, error 80.00 prevents the device from printing until the supply is correctly identified.

Yes, but error 80.00 occurs more frequently if the compatible chip quality is poor.

Keep the contacts clean and use only original supplies certified by the manufacturer.

Lexmark MB2242adwe error 80.00: Toner Failure | Vimazdev