80-10MB2135

Lexmark MB2135 Error 80-10: Network Issue

The Lexmark MB2135 error 80-10 is a communication alert indicating that your printer is struggling to maintain a stable link with the local network. Common causes include signal drops, IP conflicts, or degraded Ethernet cabling. It is a standard issue in busy office environments that can typically be solved by resetting the connection or assigning a static IP address.

1 views

Common causes

  • 1DHCP failure: Router failing to lease an IP address.
  • 2Cable damage: Physical transmission faults in the RJ45 cable.
  • 3IP Conflict: Duplicate address assignment on the network.
  • 4Network card failure: Hardware fault in the integrated port.

Solutions

Quick Diagnosis

If your workstation fails to find the printer on the network but the USB connection is functioning, the problem is limited to your network adapter or cabling.

Step-by-Step Solution

  1. Ensure the Ethernet cable is tightly plugged into the wall and the printer.
  2. Power cycle both your router and the printer (wait 30 seconds).
  3. Print a configuration page to see the currently assigned IP.
  4. If it shows '0.0.0.0', it is failing to receive a dynamic IP, check your DHCP server.

Prevention and Maintenance

Avoid using low-quality or frayed Ethernet cables. Assigning a dedicated static IP outside of the main auto-assignment range helps prevent future conflicts.

When to Call a Technician

If you have tried a different Ethernet cable and verified IP settings but the error 80-10 persists, the integrated network port on the mainboard may be faulty.

Technical Specifications

  • Technology: Monochrome Laser
  • Speed: 35 ppm
  • Connectivity: USB, Gigabit Ethernet, WiFi
  • Compatible consumable: MB2135 cartridges
  • Recommended use: Corporate office
  • Drivers / official firmware

Frequently asked questions

It is a communication failure on the network adapter, usually signaling an IP loss or router configuration conflict.

Yes, rebooting the router is the first step to rule out incorrect DHCP IP assignments.

Absolutely. Check the RJ45 cable for physical damage or bent pins.

Yes, you can configure a static IP via the control panel to prevent network conflicts.

Lexmark MB2135 Error 80-10: Network Issue | Vimazdev