80.00Lexmark MB2338adw

Lexmark MB2338adw Error 80.00: Network Connectivity Fix

Error 80.00 on the Lexmark MB2338adw points to a Network Interface Controller (NIC) issue. This manifests as lost connection or inability to reach the printer via network protocols. Often, manual IP configuration resolves this persistent status.

1 views

Common causes

  • 1Duplicate IP address on the local network.
  • 2Damaged Ethernet cable or port.
  • 3Timeout during DNS resolution.

Solutions

Reset Network Settings

  1. Disconnect network cables.
  2. Go to the Printer Settings menu and perform a Network Reset.
  3. Reboot the machine and reconnect the cable.

Assign Static IP

  1. Access the control panel, navigate to TCP/IP settings.
  2. Switch from DHCP to Manual.
  3. Input valid IP, Subnet Mask, and Gateway for your network segment.

Steps to follow

  1. 1

    Network Menu

    Go to Settings > Network/Ports > TCP/IP.

  2. 2

    Configure IP

    Manually set the IP address for persistent network stability.

  3. 3

    Restart

    Save configuration and power cycle the printer.

Frequently asked questions

It is typically an IP conflict or a failure in the printer's network interface chip.

Static IP is preferred for printers to ensure network mapping remains consistent.

Not necessarily; network settings should be configured correctly regardless of the connection medium.