62.00T650dn

Error 62.00 Lexmark T650dn: Fuser Motor Failure

The Lexmark T650dn error 62.00 indicates a problem with the fuser motor. This crucial heating component fixes toner to paper. The error stops operations for safety.

1 views

Common causes

  • 1Fuser unit motor wear.
  • 2Overloaded fixing system.
  • 3Damaged electrical connections.
  • 4End-of-life thermal components.

Solutions

Quick Diagnosis

The error 62.00 identifies that the fuser unit motor isn't spinning properly during print cycles.

Step-by-Step Solution

  1. Turn off the printer and disconnect power.
  2. Allow 30 minutes for cooling.
  3. Access the rear, remove the fuser, and check for jams.
  4. Check the electrical connectors for burning.

Maintenance and Prevention

Avoid exceeding paper grammage limits. Replace the fuser unit as per printer lifecycle recommendations.

When to Call a Technician

If the fuser exhibits signs of physical wear or the error persists, replacing the entire fuser assembly is required.

Technical Specifications

  • Technology: Laser
  • Speed: 48 ppm
  • Connectivity: USB, LAN
  • Media handling: Adjustable trays
  • Consumable: T650 Toner
  • Usage: Corporate environments
  • Official Drivers

Steps to follow

  1. 1

    Power off

    Unplug the printer and let the fuser cool for 30 minutes.

  2. 2

    Check fuser

    Inspect the fuser unit for obstructions or damage.

  3. 3

    Reset

    Reconnect and reboot to check if the error is cleared.

Frequently asked questions

It is a fuser motor failure error.

No, let it cool down significantly to prevent severe burns.

Only use original Lexmark toner cartridges.

Usually requires professional replacement of the fuser assembly.