604es5112
OKI ES5112 Error 604: Memory Fault Solutions
The OKI ES5112 error 604 signifies a memory error within the system, usually occurring when processing large, complex print jobs. It prevents the printer from finishing the task effectively and often requires clearing the print buffer.
1 views
Common causes
- 1Excessive data queue load.
- 2Faulty or loose DIMM memory module.
- 3Power supply voltage fluctuations.
- 4Outdated system firmware.
Solutions
Diagnóstico rápido
If the 604 error is intermittent, it is likely caused by the data volume. If it remains present after a reboot, the internal RAM is likely corrupted.Solución paso a paso
- Unplug the printer from the power source.
- Clear all active print jobs on your OS spooler.
- Restart the printer after 30 seconds of downtime.
- Re-install the driver if the issue happens with specific applications.
Prevención y mantenimiento
Ensure the printer is plugged into a surge protector to avoid electrical noise interfering with RAM stability. Do not overwhelm the printer memory with excessive high-res files.Cuándo llamar a un técnico
If the error 604 persists even during idle time or simple test pages, the main logic board likely needs replacement.Ficha técnica del equipo
- Technology: LED laser digital printer.
- Speed: Up to 47 ppm.
- Connectivity: USB 2.0, Ethernet.
- Compatible consumables: ES5112 series toner and drum.
- Recommended use: High productivity office environments.
- Official drivers / firmware
Steps to follow
- 1
Hard reset
Unplug the printer power for 30 seconds.
- 2
Clear queue
Delete pending print jobs from the computer.
- 3
Check DIMM
Ensure internal memory modules are firmly seated.
Frequently asked questions
The 604 error indicates a system memory fault while processing print data.
Usually not; it's a data-handling conflict that resets upon power cycling.
It uses the ES5112 series high-yield toner.
Send documents in smaller batches to avoid overwhelming the memory.