6000PIXMA TS8420a

Canon PIXMA TS8420a 6000 error: Feed fix

The Canon PIXMA TS8420a 6000 error signals an obstruction in the paper feed mechanism. This prevents the printer from pulling paper into the printing path, often halting jobs mid-start. Why does Canon PIXMA show 6000 error? This usually happens because small debris, scraps of torn paper, or dust accumulation prevent the feed rollers from working smoothly.

1 views

Common causes

1Foreign object in feed path.
2Paper scraps jam.
3Dirty or worn rollers.
4Sensor fault.

Solutions

Diagnóstico rápido

If the printer reports error 6000 at the start of every print, perform a visual check of the paper path. Small torn pieces are the most likely culprit.

Solución paso a paso

Check tray: Clear the paper tray and use a flashlight to spot obstructions.
Clean rollers: Gently clean the rollers with a damp (not wet) cloth.
Reset: Turn off the device, unplug for a minute, then restart.

Prevención y mantenimiento

Regularly clean the rubber rollers to maintain paper grip. Stick to recommended media sizes and weights to ensure a smooth paper path.

Cuándo llamar a un técnico

Should the error return after thorough cleaning, internal mechanical wear may require professional repair.

Ficha técnica del equipo

Technology: Inkjet
Use: Photo / Office
Connectivity: Wi-Fi
Compatible Consumable: PGI-280 / CLI-281
Recommended Use: Home / Small Office
Official Drivers / Firmware

Steps to follow

1
Check tray
Empty the tray and check for any foreign objects causing the jam.
2
Clean rollers
Wipe down the feed rollers with a moist cloth.
3
Reset
Power cycle the printer to clear the error status.

Frequently asked questions

It means the paper feed mechanism is jammed, typically by foreign objects or debris.

Yes, usually clearing away small scraps resolves it instantly.

Always use genuine PGI-280/CLI-281 series ink tanks.

If grinding noises occur or cleaning fails to clear the error, contact support.