6000MAXIFY MB2720

Canon MAXIFY MB2720 6000 error: How to fix paper feed issues

The Canon MAXIFY MB2720 6000 error is a frequent alert related to the paper feeding mechanism. This message appears when the printer struggles to pick up paper or when a sensor is obstructed by debris. Following our guide on how to clear 6000 error on MAXIFY MB2720 will help you restore full functionality by cleaning the feed components.

0 views

Common causes

  • 1Debris or paper dust on the rubber feed rollers.
  • 2Obstruction of the paper presence sensor.
  • 3Improperly adjusted paper side guides.
  • 4Worn-out rubber on feed rollers due to high volume use.

Solutions

Diagnóstico rápido

The 6000 error indicates that the printer failed to feed a page correctly. Check for small, torn pieces of paper that might be stuck in the internal mechanism. If the paper path is clear, dirty rollers are the most likely cause.

Solución paso a paso

  1. Check tray: Fully remove the paper trays to inspect the internal feed area.
  2. Clean rollers: Carefully wipe the feed rollers with a soft, lint-free cloth dampened with distilled water to restore grip.
  3. Reset sensors: Power cycle the printer to allow the sensor to recalibrate.
  4. Proper loading: Align the paper guides snugly to prevent paper skews during feeding.

Prevención y mantenimiento

Always fan the paper stack to prevent static-cling that causes multiple sheets to feed at once. Perform a roller cleaning every six months using a non-abrasive cloth. Avoid overloading the tray beyond its capacity limit.

Cuándo llamar a un técnico

If the 6000 error persists after manual cleaning and checking for obstructions, the feed motor or the specific sensor component may require professional repair.

Ficha técnica del equipo

  • Technology: Inkjet Multifunction
  • Speed/Yield: 24 ppm
  • Connectivity: Wi-Fi, Ethernet, USB
  • Paper Capacity: 500 sheets
  • Compatible Consumables: PGI-2200 series
  • Recommended Use: Office/Business
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check tray

    Remove the paper tray and check for any torn paper scraps in the feed area.

  2. 2

    Clean rollers

    Wipe the rubber feed rollers with a lint-free cloth dampened with distilled water.

  3. 3

    Reset sensors

    Power the printer off and back on to recalibrate the paper input sensors.

  4. 4

    Proper loading

    Ensure the side paper guides are adjusted snugly against the paper edges.

Frequently asked questions

The 6000 error is a paper feed alert, typically caused by debris in the rollers or a blocked paper input sensor.

Most of the time, cleaning the feed rollers with a damp cloth resolves the issue.

Yes, using paper that is too thin or excessively thick can lead to feed failures.

Fan the paper stack before loading and periodically clean the rubber rollers to maintain friction.