600C542dw

OKI C542dw error 600: Troubleshooting guide

The OKI C542dw error 600 is a status code indicating a communication failure or detection error regarding the paper tray. This message stops the device when it fails to sense the presence of the paper drawer.

1 views

Common causes

  • 1Stuck tray presence sensor.
  • 2Tray rail misalignment.
  • 3Dust on size-detection sensors.
  • 4Paper debris inside the bay.

Solutions

Quick Diagnosis

This error is almost always caused by the tray sensors failing to acknowledge the drawer insertion. Check if any paper debris is interfering with the sensor flag.

Step-by-Step Solution

  1. Remove Tray: Slide out the main tray completely.
  2. Check Sensors: Look for stuck sensor flags inside the slot.
  3. Clean: Use canned air to remove dust from the internal bay.
  4. Reset: Slide the tray back in firmly and cycle power.

Prevention and Maintenance

Keep the paper stack below the maximum capacity line. Regular dusting of the feed area ensures the tray sensors trigger correctly.

When to Call a Technician

If the sensors are broken, contact support to replace the sensor housing.

Technical Specifications

  • Technology: Digital LED.
  • Speed: 30 ppm.
  • Connectivity: Wi-Fi, Ethernet.
  • Consumables: Genuine OKI C542 series toner.
  • Drivers / official firmware

Steps to follow

  1. 1

    Remove Tray

    Fully pull out the paper tray and inspect for blockages.

  2. 2

    Clean Rollers

    Wipe the feed rollers using a dry, lint-free cloth.

  3. 3

    Reboot

    Reinsert the tray and restart the printer.

Frequently asked questions

The printer is unable to detect that the tray has been loaded.

Yes, you cannot print until the tray is correctly recognized.

Use authentic OKI C542 toner for best performance.

Don't overfill the tray and keep the machine free of paper dust.