600-02ES2032a

OKI ES2032a error 600-02: Transfer Roll Fix

The OKI ES2032a error 600-02 is a service code associated with the transfer roller. This component is crucial for moving toner from the drum to the paper. If you are asking why does my OKI ES2032a show error 600-02, the roller may be worn out, dirty, or incorrectly installed.

1 views

Common causes

  • 1Misaligned transfer roller.
  • 2Worn conductive surface.
  • 3Excessive toner buildup on contacts.
  • 4Sensor failure.

Solutions

Diagnóstico rápido

Usually signals poor print quality or complete failure to print. Check if the roller looks deformed.

Solución paso a paso

  1. Open the front unit.
  2. Locate the transfer roller assembly.
  3. Ensure it is firmly seated on both sides.
  4. Clean away any toner dust using a soft, dry cloth.

Prevención y mantenimiento

Avoid touching the roller with bare fingers. Replace this part periodically as part of your scheduled maintenance program.

Cuándo llamar a un técnico

If re-seating the roller does not solve the electrical fault, the transfer contact pins may be broken and require a professional technician.

Ficha técnica del equipo

  • Technology: LED Laser
  • Compatible consumable: OKI ES2032 series
  • Connectivity: Ethernet, USB
  • Recommended use: Office use
  • Official drivers / firmware