60.01MS317dn

Fix Lexmark MS317dn Error 60.01: Maintenance Required

Error 60.01 on the Lexmark MS317dn indicates that the maintenance interval has been reached. This is a notification, not a breakdown, informing the user that internal rollers and pads need inspection or replacement. Performing maintenance prevents potential paper jams.

1 views

Common causes

  • 1Internal counter reached the pre-set print limit.
  • 2Natural degradation of the pickup roller rubber.
  • 3Heavy dust buildup affecting the paper feed sensor accuracy.

Solutions

Resetting the Maintenance Counter

  1. Access the 'Configuration Menu' by holding OK and Right Arrow while powering on.
  2. Navigate to 'Maintenance' or 'Counters'.
  3. Select 'Reset maintenance counter' and confirm.

Internal Maintenance

  1. Wipe the pickup rollers with a damp, lint-free cloth.
  2. Remove any paper debris or toner dust from the internal pathways.

Steps to follow

  1. 1

    Service Mode

    Boot into the service menu using the hardware button combination.

  2. 2

    Clear Counter

    Locate and reset the maintenance counter.

  3. 3

    Validation

    Perform a test print to confirm the error has been cleared.

Frequently asked questions

You should replace parts if you notice declining print quality or frequent paper jams.

It is safe, but skipping physical maintenance may lead to mechanical failures over time.

The threshold is determined by the manufacturer, usually based on 100k-200k page impressions.