60-00CX331adwe

Lexmark CX331adwe 60-00 error: Memory overflow

The Lexmark CX331adwe 60-00 error is an alert for insufficient memory (RAM) capacity. This typically occurs when the printer receives documents with high-resolution graphics that exceed its buffer capacity. Follow this guide to manage your print jobs effectively.

1 views

Common causes

  • 1Overly complex document graphics or high-DPI images.
  • 2Print spooler congestion on the network.
  • 3Accumulation of temporary data from multiple print tasks.
  • 4Hardware defect in the printer's RAM module.

Solutions

Quick Diagnosis

If you see this error immediately after sending a large file, the complexity of the image data is likely the cause. Check the file size of your document.

Step-by-Step Solution

  1. Clear the print queue on all computers connected to the printer.
  2. Restart the device to refresh the memory cache.
  3. Reduce the DPI or resolution of your document before sending it again.
  4. If you have high-traffic networking, try direct USB connection to rule out overhead.

Prevention and Maintenance

Limit the number of simultaneous print jobs. Keeping the printer firmware updated ensures the device manages internal memory usage as efficiently as possible.

When to call a technician

If you get the 60-00 error even with a simple test page, there may be a permanent hardware failure in the onboard memory, requiring motherboard repair.

Equipment Technical Data

  • Technology: Color Laser
  • Memory: 512 MB
  • Connectivity: USB, Ethernet, WiFi
  • Compatible consumables: C331/C341 series
  • Speed: 26 ppm
  • Official Drivers / firmware

Steps to follow

  1. 1

    Clear print queue

    Cancel all pending print jobs from your computer's spooler.

  2. 2

    Power cycle

    Restart the printer to clear the temporary memory cache.

  3. 3

    Optimize documents

    Lower the resolution of very heavy files before sending them to the printer.

Frequently asked questions

This happens when the internal RAM cannot process an overly complex or large file sent for printing.

It is not serious; it usually just means the printer cannot handle the specific data payload sent at once.

Usually not, just better document management for large files.

Print complex PDFs in smaller batches if you encounter consistent memory issues.