5B00PIXMA Pro-200

Canon PIXMA Pro-200 error 5B00: Solutions

The Canon PIXMA Pro-200 error 5B00 indicates that the waste ink absorber has reached its calculated limit. When this happens, the printer triggers a hardware lockout to prevent internal ink spills. What is error 5B00 on my printer? It is a non-user-serviceable maintenance alert signaling that the internal absorbent pads need physical replacement.

0 views

Common causes

  • 1Waste ink absorber pad reaching capacity.
  • 2Accumulated ink from multiple nozzle purges.
  • 3Internal hardware counter reached factory threshold.
  • 4Long-term use of intensive cleaning routines.

Solutions

Diagnóstico rápido

The 5B00 error is a permanent lockout mode. If you see this code, the internal ink counter has hit 100%, and the system requires professional reset after hardware component replacement.

Solución paso a paso

  1. Stop all operations to prevent internal ink damage.
  2. Contact an authorized center to order a waste ink absorber replacement kit.
  3. Request a service technician to physically replace the pad.
  4. Reset the firmware counter using authorized diagnostic tools after the physical fix.

Prevención y mantenimiento

Keep the printer in a clean environment and avoid excessive cleaning cycles. High volumes of cleaning sequences accelerate the filling of the waste pad.

Cuándo llamar a un técnico

Always. Resetting the counter without replacing the physical pad will likely result in ink overflowing onto the logic board, causing irreparable damage.

Ficha técnica del equipo

  • Technology: 8-color professional inkjet photo printer.
  • Speed/output: High quality A3+ output.
  • Connectivity: USB, Wi-Fi, Ethernet.
  • Feed capacity: Rear-fed paper.
  • Compatible consumables: CLI-65 series.
  • Recommended use: Professional photography.
  • Official drivers / firmware

Frequently asked questions

Error 5B00 means the internal waste ink absorber counter has reached its capacity limit.

No, the printer locks itself to prevent internal ink leakage and hardware damage.

The waste ink pad must be replaced by a professional technician.

Yes, it is a standard maintenance alert for inkjet printers after long-term high-volume use.