5b00pixma-ip110

Canon PIXMA iP110 error 5b00: Ink Counter Reset Guide

The Canon PIXMA iP110 error 5b00 occurs when the internal ink waste counter hits its capacity limit. This prevents the printer from operating to avoid potential internal ink spills. Resolving the 5b00 error in your PIXMA iP110 requires a specific service mode sequence to reset the printer's internal logic.

0 views

Common causes

  • 1Excessive automatic cleaning cycles.
  • 2Hardware sensor reaching its threshold.
  • 3Firmware miscommunication with the EEPROM.
  • 4Physical saturation of internal ink pads.

Solutions

Quick Diagnostics

The error is typically indicated by 7 flashing lights on the front panel. Confirm the status by checking if the device fails to initialize during the power-on sequence.

Step-by-Step Solution

  1. Power off the device and unplug it.
  2. Enter Service Mode by holding Stop and Power buttons.
  3. Reset the counter by pressing the Stop button five times in sequence.
  4. Restart the printer to finalize the state change.

Prevention and Maintenance

Avoid excessive deep cleaning cycles. Keep the printer on a level surface at all times to ensure ink flows into the absorbers correctly. Original cartridges ensure the most efficient ink usage.

When to Call a Technician

If the reset fails or there is visible leakage, the physical ink pads are saturated and must be replaced by an authorized technician.

Technical Data Sheet

  • Technology: FINE Inkjet
  • Speed: Up to 9 ipm black
  • Connectivity: Wi-Fi, USB, Mobile Printing
  • Capacity: 50-sheet rear tray
  • Compatible Consumables: PGI-35 / CLI-36 series
  • Recommended Use: Portable / Home office
  • Official Drivers

Steps to follow

  1. 1

    Enter Service Mode

    With the printer off, hold down the Stop button, then press Power.

  2. 2

    Execute Sequence

    Release Stop while holding Power, then press Stop 5 times and release both buttons.

  3. 3

    Reset Counter

    Press the Stop button 3 times to clear the ink absorber counter.

Frequently asked questions

This error occurs when the internal ink waste counter hits its capacity limit. This prevents the printer from operating to avoid potential internal ink spills. Resolving the 5b00 error in your PIXMA iP110 requires a specific service mode sequence to reset the printer's internal logic.

Yes, it is a safety lock to prevent internal ink leakage. The printer will remain inactive until the counter is reset.

This model uses the PGI-35 black and CLI-36 color ink cartridges.

Perform automatic cleaning only when you notice print quality issues to conserve ink absorber space.