5b00MAXIFY GX2050

Canon MAXIFY GX2050 error 5b00: Ink Absorber Fix

The Canon MAXIFY GX2050 error 5b00 appears when the internal waste ink counter has reached its capacity limit. This indicates that the internal absorbing pads may be full and require attention. To clear the Canon MAXIFY GX2050 error 5b00, you need to access service mode and reset the counter, preferably after physical maintenance.

0 views

Common causes

  • 1Waste ink counter reached factory threshold.
  • 2Excessive automated cleaning cycles.
  • 3Physical ink absorber saturated.
  • 4Waste ink overflow in the base area.

Solutions

Diagnóstico rápido

The 5b00 error is a preventive safety lock. Why does my Canon show error 5b00? The printer calculates ink used during cleanings and locks the system before waste ink overflows inside the housing.

Solución paso a paso

  1. Service Mode: Hold 'Stop' while holding 'Power', release 'Stop', then press 'Stop' 5 times.
  2. Reset: Once in service mode, use the reset tool to set the counter to zero.
  3. Maintenance: If possible, open the base to clean or replace physical pads.
  4. Finalize: Power off and on to confirm the error is gone.

Prevención y mantenimiento

Avoid unnecessary printhead cleaning cycles, as each one increases the waste counter. If working with high volumes, plan a physical cleaning of the pads every two years.

Cuándo llamar a un técnico

The software reset is a temporary solution. If you see ink stains under the printer, the absorber is physically saturated and must be replaced urgently by a technician.

Ficha técnica del equipo

  • Technology: MegaTank Inkjet
  • Speed/Performance: 15 ipm
  • Connectivity: Wi-Fi, Ethernet
  • Paper capacity: 250 sheets
  • Consumable: GI-56 ink series bottles
  • Recommended use: SMBs and Home office
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Service Mode

    Enter service mode using the correct button sequence.

  2. 2

    Reset

    Select the option to reset the waste ink counter.

  3. 3

    Restart

    Power off and on to apply changes.

Frequently asked questions

The ink absorber (pads) has reached its estimated maximum capacity.

If you ignore the warning, waste ink could overflow, causing physical damage.

Always use original GI-56 series bottles to maintain correct performance.

It is advisable to physically clean or replace the pads when resetting the counter.