HP OfficeJet Enterprise X585dn error 59.F0: Fix
HP OfficeJet Enterprise X585dn error 59.F0 is a mechanical failure code linked to the ink cartridge delivery system motor. When the unit fails to rotate the ink supply mechanism correctly, it triggers this error to protect the internal gear assembly. Users often wonder why my HP OfficeJet Enterprise X585dn shows error 59.F0 after installing a new cartridge.
Common causes
- 1Mechanical blockage in cartridge bay
- 2Faulty cartridge seating
- 3Motor drive gear wear
- 4Ink residue buildup interfering with internal movement
Solutions
Quick Diagnosis
If the error occurs directly after a cartridge change, the new cartridge is likely the culprit. Verify the cartridge sits flush in its slot without forcing it.Step-by-Step Solution
- Power off the device.
- Open the access door and remove all ink cartridges.
- Inspect the empty bay for any dried ink spills or debris.
- Reinstall cartridges one by one and power on to re-sync the rotation motor.
Prevention and Maintenance
Always use authentic HP 980 inks. Third-party cartridges often vary in size, which may place unnecessary strain on the rotation motor and lead to a 59.F0 error.When to Call a Technician
If the motor exhibits loud grinding sounds before the error code flashes, professional mechanical inspection is required.Device Specifications
- Technology: Inkjet Multifunction
- Speed: 42 ppm
- Connectivity: Ethernet, USB 2.0
- Compatible Supplies: HP 980 ink series
- Drivers / Official Firmware: https://support.hp.com/us-en/drivers/hp-officejet-enterprise-x585dn
Steps to follow
- 1
Check cartridges
Remove and reseat each ink cartridge.
- 2
Power reset
Turn off the device and wait 30 seconds.
- 3
Internal inspection
Look for ink leaks or debris in the bay.
Frequently asked questions
It indicates the motor rotating the ink cartridges has encountered resistance or failed.
Possibly. A faulty or poorly manufactured cartridge can prevent the rotation mechanism from operating smoothly.
This printer uses the HP 980 series ink cartridges.
It can occur when using non-genuine consumables that create internal drag on the drive system.