59.F0Color LaserJet Pro M254dw

HP Color LaserJet Pro M254dw Error 59.F0: Fix

The HP Color LaserJet Pro M254dw error 59.F0 relates to the drive motor system. This prevents the printer from starting the rotation cycle for toners. Following this guide will help identify if the issue is a simple blockage or a mechanical motor failure.

1 views

Common causes

1Stuck toner cartridge gear.
2Failure of the drive motor assembly.
3Transfer belt (ITB) resistance.
4Sensor failure reporting motor stall.

Solutions

Diagnóstico rápido

The 59.F0 error code indicates a failure of the ITB or toner drive motor. If the printer feels jammed, it's a mechanical obstruction; otherwise, it's a motor component issue.

Solución paso a paso

Power off the printer entirely.
Remove all toners.
Inspect the gears for any loose toner or plastic shards.
Manually test rotation to see if gears are stuck.
Restart to trigger a drive test.

Prevención y mantenimiento

Use original HP toners to minimize internal spills. Clean the printer area annually to prevent debris buildup in the motor gears.

Cuándo llamar a un técnico

If the error 59.F0 recurs after deep cleaning, the imaging drive unit has failed and requires professional repair.

Ficha técnica del equipo

Technology: Color laser
Speed: 22 ppm
Connectivity: Wi-Fi, Ethernet, USB
Input capacity: 250 sheets
Consumibles: HP 202A / 202X
Recommendation: Small office
Official drivers / firmware

Steps to follow

1
Power reset
Turn off and unplug for 60 seconds.
2
Toner check
Remove toners and check for gear rotation.
3
Clear debris
Ensure no loose toner is clogging the drive gears.
4
Restart
Reinsert supplies and power on.

Frequently asked questions

It is a drive motor failure indicating the system cannot spin the toner cartridges or the transfer belt.

It usually suggests internal motor or imaging unit degradation requiring service.

HP 202A or 202X series cartridges.

Only use high-quality toner to prevent buildup inside the machine.