59.c0Color LaserJet Pro MFP M183fw

HP Color LaserJet Pro MFP M183fw error 59.c0: Repair

The HP Color LaserJet Pro MFP M183fw error 59.c0 refers to a failure in the Image Transfer Belt (ITB) motor unit. The system detects that the motor driving the belt isn't reaching required speeds or is meeting excessive resistance. It is a critical motor error often caused by toner buildup.

1 views

Common causes

  • 1Image Transfer Belt (ITB) blocked by residual toner.
  • 2Electronic failure of the ITB driving motor.
  • 3Damaged transfer belt due to obstruction.
  • 4Rotation speed sensor failure.

Solutions

Quick diagnosis

If you see toner streaks on the edges of the paper before the 59.c0 error appears, excess waste toner is likely impeding the ITB unit rotation.

Step-by-step solution

  1. Power off: Disconnect the machine.
  2. Inspect: Remove the transfer belt unit and check its rotation.
  3. Clean: Remove spilled toner from the unit gears.
  4. Test: Reinsert the unit firmly and restart.

Prevention and maintenance

Use premium toner. Waste toner outside the cartridge is the primary cause of this error as it increases belt friction.

When to call a technician

If the belt doesn't rotate smoothly or broken internal gears are visible, the ITB unit requires professional replacement.

Equipment data sheet

  • Technology: Color Laser
  • Speed: 17 ppm
  • Connectivity: Wi-Fi / Ethernet
  • Consumable: HP 215A
  • Usage: SOHO
  • Drivers

Steps to follow

  1. 1

    Power off

    Disconnect the machine to avoid shorts.

  2. 2

    Inspect

    Remove the transfer belt unit and check rotation.

  3. 3

    Clean

    Remove spilled toner from unit gears.

  4. 4

    Test

    Reinsert the unit firmly and restart.

Frequently asked questions

This error points to a failure in the transfer motor or the ITB (Intermediate Transfer Belt) rotation sensor.

You need to check that the transfer belt rotates freely without jamming.

Often, excess residual toner blocks the transfer belt, putting excessive load on the motor.

Only if the belt is torn or the rollers have excessive play.