59.c0color-laserjet-pro-mfp-m182n

HP Color LaserJet Pro M182n Error 59.C0 Fix

The hp color laserjet pro mfp m182n error 59.c0 is a motor rotation error. When the print engine attempts to rotate the drums or transfer belt, it monitors motor torque; if the expected speed isn't reached, it triggers this protective error to prevent mechanical destruction.

1 views

Common causes

  • 1Faulty main drive motor.
  • 2Toner cartridge seizure.
  • 3Broken gear teeth in the transfer unit.
  • 4Power supply voltage fluctuation.

Solutions

Quick Diagnosis

Mechanical noise or total silence after the boot sequence indicates a motor-related issue. Check the toner drum rotations.

Step-by-step Solution

  1. Power Off: Fully disconnect from power.
  2. Check Mechanics: Remove all toner cartridges and rotate them manually (if possible) to check for resistance.
  3. Debris Check: Look for any obstructions in the drum rotation area.
  4. Test Run: Power on without cartridges to see if the engine turns successfully.

Prevention and Maintenance

Use genuine HP toner to ensure proper lubrication and torque specs are maintained inside the gear assembly.

When to Call a Technician

If the motor does not turn even after removing the cartridges, the internal motor assembly is faulty.

Equipment Technical Data

  • Technology: Color Laser
  • Consumable: HP 215A
  • Drivers / firmware: Support Site
HP Color LaserJet Pro M182n Error 59.C0 Fix | Vimazdev