59.A0LaserJet Pro MFP M148dw

Error 59.A0 HP LaserJet Pro MFP M148dw: Motor failure

The HP LaserJet Pro MFP M148dw error 59.A0 represents a critical failure in the printer's main motor. This component is responsible for moving the rollers and the imaging drum. When the system detects resistance or a failure in the motor's encoder, it stops the process to avoid mechanical damage.

1 views

Common causes

  • 1Mechanical Resistance: Gears stuck due to dirt.
  • 2Electrical Failure: Motor does not reach configured RPM.
  • 3Encoder Wear: Motor speed sensor is not reading data correctly.
  • 4Firmware Error: Communication failure with the motor controller.

Solutions

Quick Diagnosis

If the equipment makes strange noises or stops right when starting the print cycle, there is a mechanical obstruction or the motor has failed electrically.

Step-by-Step Solution

  1. Turn off the equipment and unplug it for at least 5 minutes.
  2. Verify that there are no paper scraps in the fuser area.
  3. Gently turn the rollers manually to rule out internal jams.
  4. If the error persists upon startup, the motor has lost its position reference.

Prevention and Maintenance

Avoid feeding damp or wrinkled paper that may increase friction. Keep the rollers clean to reduce the load on the main motor.

When to Call a Technician

This error usually requires the replacement of the main motor assembly.

Technical Specifications

  • Technology: Laser printing
  • Compatible Consumables: HP 94A/94X cartridge (CF294 series)
  • Speed: 30 ppm
  • Connectivity: USB, Ethernet, WiFi
  • Recommended Use: Small office environments
  • Official drivers / firmware

Frequently asked questions

It is a main motor failure; you can only try deep cleaning and a factory reset.

Error 59.A0 HP LaserJet Pro MFP M148dw: Motor failure | Vimazdev